显示明细
归类时间 0,15小时.
重量: 0.50 KG
Package Dimensions (LxHxW): 15x8x3 cm
每台车使用: Amount unknown
Set includes
- Drill with handle
- Awl with handdle
- 5 rubber cords, each 10 cm long
- Tube of glue (12g)
How to use the kit:
1. Locate the area where the tyre has been punctured.
2. Grease the cutter with the glue provided and drive it into the hole, following the angle of the hole fill it well with glue.
3. Thread the cord onto the awl and bend it in half with the ends up.
4. Apply glue to the cord and use the awl to press it into the hole, following the angle of the previous penetration. With a firm motion, push the awl and cord through the damaged area.
Make sure that the cord goes all the way through the tyre.
Be careful not to pull the entire cord inwards.
The two ends of the cord should protrude approximately 0.5 - 1cm above the tyre tread. Firmly remove the stalk from the tyre (do not twist the stalk inside the tyre when removing it - this may break it).
5. Cut off the two protruding ends of the cord leaving 5mm above the tyre. The cord will flush with the tread surface as you drive.
Let one of our BMW specialized workshops do the mounting, we got the know-how and low prices!
Everything for BMW / MINI
Please note! We ”only” got about 27.000 new and used products in our online catalogue out of approximately 500.000 BMW & MINI products available, so please contact us if you don´t find what you need! And please have in mind that we got the lowest prices and the largest range of BMW / MINI products! Please also note – if you got the original BMW part number (11 digits, or optionally the last 7 digits) you can plot it directly into the search field or the shopping basket, and you will be able to see the price and order it if you like, even though the part isn´t in the online catalogue. Contact us! used parts Nordborg@schmiedmann.com, new parts odense@schmiedmann.com